Category: Commercial

For facility managers and business owners in Newcastle, January isn’t just about back-to-work coffees. It is the critical window for strategic planning. You are reviewing budgets, assessing assets, and looking at risk management for the year ahead.

But there is one physical asset that often gets ignored until it is too late: your perimeter fencing.

In 2026, the cost of theft isn’t just the replacement of tools or vehicles; it’s the operational downtime, the insurance premiums, and the reputational damage. A secure perimeter is your first line of defence, yet many industrial sites in Beresfield, Carrington, and Tomago are relying on rusted chain wire installed in the 90s.

As leading fencing contractors in Newcastle, we want to shift your perspective. Don’t view fencing as a “grudge purchase.” View it as a capital investment in loss prevention.

To help you start the year securely, we have developed this 2026 Fencing Audit Checklist. Take a walk around your site this week and check these four critical areas.

1. The “Cut and Climb” Audit

The majority of “break-ins” aren’t sophisticated operations; they are crimes of opportunity. Thieves look for the path of least resistance.

The Checklist:

• Check for “Belly” in Chain Wire: If your chain wire fencing has lost tension, the bottom wire becomes loose. A thief can easily lift it and slide underneath in seconds.
• Inspect the Selvage: Look at the top and bottom of the mesh. Is the wire twisted and barbed (knuckle/barb) or just folded over (knuckle/knuckle)? For industrial sites, you need barbed tops to deter climbing.
• Look for “Ladders”: Are there pallets, bins, or overgrown trees stacked against the fence line? You might have a 2.4m high fence, but if you have a stack of pallets next to it, you’ve built a staircase for intruders.

Expert Insight: If you find multiple cuts in your chain wire that have been patched up, your fence is telling you a story. It’s time to upgrade to a rigid anti-cut solution.

2. Material Selection: Are You Using the Right Armour?

Not all commercial fencing is created equal. In 2026, we are seeing a shift away from standard chain mesh towards more robust, architectural security solutions.

The Baseline: Chain Wire Fencing

• Best for: Large perimeters, holding yards, and budget-conscious sites.
• The Risk: It is cuttable with standard bolt cutters.
• The 2026 Upgrade: If you stick with chain wire, ensure you are using heavy-duty 3.15mm wire (rather than the standard 2.5mm) and consider adding a top rail for rigidity.

The Modern Standard: Garrison Fencing

• Best for: Car dealerships, corporate HQs, and schools.
• The Look: Tubular steel uprights with crimped, spear-like tops.
• Why it works: It looks professional (especially in black) but is incredibly difficult to climb. Unlike chain wire, it cannot be cut with simple hand tools. It strikes the perfect balance between “welcoming to clients” and “hostile to thieves.”

The Fortress: Palisade Fencing

• Best for: High-risk industrial sites, chemical storage, and utilities.
• The Look: Large steel pales with triple-pointed spikes.
• Why it works: This is the ultimate visual deterrent. The design makes it virtually impossible to climb or straddle, and it is intimidating enough to make thieves move on to the next property.

3. The Weakest Link: Your Gates

A fence is only as secure as its opening. In our experience, 90% of security breaches happen because of a gate failure, not a fence breach.

The Checklist:

• Hinge Drop: Heavy industrial gates can drop over time. If the gate drags on the ground, your staff will likely leave it open because it’s “too hard to close.” This is a massive security gap.
• The Gap Under the Gate: We often see sites with a perfectly secure 2.4m fence, but a 300mm gap under the gate due to uneven driveways. This is an open invitation for crawl-under theft.
• Automation: Are you still relying on a padlock and chain? Security gates in Newcastle are increasingly moving to automated sliding systems with GSM access (open via phone). This ensures the gate closes automatically after every vehicle, removing human error.

4. The Aesthetics of Security

This is the overlooked factor. In 2026, brand image matters.

If your front boundary is a rusted, leaning mess of barbed wire, it signals to clients that you don’t care about your facility. It also signals to criminals that your security systems probably aren’t maintained either.

Upgrading to a black powder-coated commercial fencing solution (like Garrison) does two things:

1. It hardens the target: It shows the site is actively managed and secure.
2. It builds trust: It presents a professional face to your customers and stakeholders.

Don’t Wait for the Incident Report

Security is one of those things you don’t think about until it fails. But by then, the damage is done.

The goal for 2026 should be prevention. A robust, well-maintained perimeter stops the crime before it starts.

Your Next Step: The Professional Audit

You have a business to run; you don’t need to be a fencing expert. That’s our job.

At A1 Fencing Solutions, we specialise in industrial and commercial security. We can perform a comprehensive site audit, identify your vulnerabilities, and recommend solutions that fit your operational budget.

Secure your assets for the year ahead.

Request a Site Audit & Quote and let’s get your perimeter sorted.

It’s the same story every January. You’ve just spent the holidays hosting friends and family for BBQs. But instead of relaxing, you spent half the time hoping nobody would lean too hard on that rotting paling fence or notice the rust spots on the old metal panels.

If your New Year’s resolution is to finally fix up the property, you are not alone. January and February are the busiest months for fencing contractors in Newcastle as homeowners look for a fresh start before the year gets hectic.

But the first question everyone asks is the one most contractors are afraid to answer online: “How much is this actually going to cost?”

At A1 Fencing Solutions, we believe in transparency. While we can’t give you a legally binding quote without seeing your property, we can give you an honest, up-to-date guide on what to expect in 2026.

Here is your breakdown of new fence costs in Newcastle this year.

The “Per Metre” Myth

Before we talk numbers, a quick warning. You will see “per metre” rates thrown around online, but these are often for materials only or based on perfect, flat, soft soil conditions.

A real-world “installed” price includes:

• Labour: The time to dig, set, and build.
• Concrete: Essential for stability in Newcastle’s clay or sandy soils.
• Hardware: Screws, caps, and hinges.

The ranges below are estimates for supply and installation in the Newcastle region for 2026.

2026 Price Guide: By Material

1. Treated Pine Timber Fencing

• Estimated Cost: $80 – $130 per metre
• The Vibe: Traditional, warm, and blends into nature.
• The Reality: This is usually the most budget-friendly option upfront. However, timber prices have stabilised in 2026 after fluctuating in previous years.
• Pros: Cheapest upfront cost; easy to repair single palings.
• Cons: Requires ongoing maintenance (painting/oiling) to prevent rot and warping; shorter lifespan than steel.

2. Colorbond Steel Fencing

• Estimated Cost: $110 – $160 per metre
• The Vibe: Sleek, modern, and private.
• The Reality: Colorbond fencing in Newcastle is the current market leader for a reason. Once it’s up, you don’t touch it for decades.
• Pros: incredibly durable; fire-resistant; zero maintenance (no painting required); comes in modern colours like Monument or Basalt.
• Cons: Higher upfront cost than pine; harder to repair if a tree falls on it (panels can dent).

3. Aluminium Slat Fencing

• Estimated Cost: $160 – $280+ per metre
• The Vibe: High-end architectural luxury.
• The Reality: Often used for front fences or feature screens rather than entire boundary lines due to the cost.
• Pros: Rust-proof (perfect for coastal suburbs like Merewether); looks like timber but acts like metal.
• Cons: Premium price point.

The “Hidden” Costs: What Else Affects Your Quote?

When you call us for fencing quotes in Newcastle, we aren’t just measuring the length. We are looking for the variables that change the price.

1. Fence Removal and Disposal

• Cost: Approx. $15 – $35+ per metre
• Why? That old fence has to go somewhere. This fee covers the labour to dismantle it and the tipping fees at the Summerhill Waste Management Centre, which have risen in 2026.
• Asbestos Warning: If your old fence is “Super Six” or fibro sheeting installed before 1990, it likely contains asbestos. This requires specialist removal and disposal, which will significantly increase the cost (often $2000+ depending on the amount).

2. Access and Terrain

• The “Easy” Job: Flat block, grass, easy truck access.
• The “Hard” Job: Steep slope, rock to drill through, or carrying materials by hand through a narrow side gate.
• The Impact: If we have to hand-dig through rock or carry concrete 50 metres by hand, labour costs will rise.

3. Gates

A standard fence run is straightforward. A gate is a piece of moving machinery.

• Single Gate: +$300 – $600
• Double Gate: +$600 – $1,000+
• Why? Gates require heavy-duty posts, specialised hinges, latches, and precise leveling to ensure they swing freely for years.

The “Neighbour Conversation”

Under the NSW Dividing Fences Act 1991, adjoining owners are generally required to share the cost of a “sufficient dividing fence.”

Pro Tip for 2026: Don’t just text your neighbour a quote.

1. Talk early: Before you call us, chat with them over the back fence.
2. Agree on style: If you want premium Colorbond but they only want to pay for budget timber, you may have to pay the difference.
3. Get it in writing: We can split the invoice for you, but we need both parties to agree to the quote first.

Why Do Quotes Vary So Much?

You might get a quote from a “guy with a ute” that is $500 cheaper than a professional company. Why?

• Post Depth: Are they concreting posts 600mm deep (standard) or just 300mm? Shallow posts will lean after the first big Newcastle storm.
• Material Quality: Are they using genuine BlueScope Colorbond steel, or a cheap imported imitation that will fade in two years?
• Insurance: If they hit a water pipe or damage your property, are they insured?

At A1 Fencing Solutions, our quotes are fully transparent. We specify the materials, the depth, and the warranty so you know exactly what you are paying for.

Ready for Your Fresh Start?

Don’t spend another year apologising for your fence. 2026 is the year to get it sorted.

We offer free, no-obligation measures across Newcastle. We’ll walk you through the options, spot any potential access issues, and give you a price that stays fixed.

Get a Price for Your New Fence

Request a Free Quote and let’s get your property looking brand new.

It is the nightmare scenario for every pool owner in Newcastle: You have just installed a beautiful new pool, the kids are desperate to jump in, but the council inspector shakes their head. “Non-compliant.”

Suddenly, your summer plans are on hold, and you are facing expensive rectifications.

As fencing contractors in Newcastle, we see this happen far too often. The NSW Swimming Pools Act 1992 and Swimming Pools Regulation 2018 are strict, but they exist for one reason: to save lives. Drowning remains one of the leading causes of accidental death for children under five in Australia.

But understanding the legal jargon can be overwhelming. “Non-climbable zones,” “intersecting barriers,” and “latch shielding” sound complicated when you just want a safe place to swim.

This guide acts as your plain-English translation. We have compiled a 2026 compliance checklist specifically for Newcastle homeowners, covering the critical rules you need to know to pass your inspection the first time.

Disclaimer: This guide provides general advice based on current NSW legislation. Regulations can change, and site-specific conditions (like sloping ground) can alter requirements. Always consult a professional for your specific site.

The “Big Three” Basics: Height, Gaps, and Gates

Before we get into the complex rules, your pool fence must meet three non-negotiable standards. If it fails any of these, it fails immediately.

1. The 1200mm Rule

The most fundamental rule is height. Your pool fence must be at least 1200mm (1.2m) high at all points.

• The Trap: This is measured from the finished ground level on the outside. If you add garden beds, mulch, or decking outside the fence later, you might accidentally reduce the effective height to less than 1.2m, rendering it non-compliant.

2. The 100mm Gap Rule

To prevent a child from squeezing through, no vertical gap can be wider than 100mm.

• Under the Fence: The gap between the bottom of the fence and the ground cannot exceed 100mm.
• Between Bars: For aluminium fencing, the distance between vertical bars must be less than 100mm.

3. The Gate Rules

Your gate is the most common point of failure. It must:

• Open Outwards: Away from the pool area. If a child pushes on it, it should close tighter, not open up.
• Self-Close and Self-Latch: From any position. Whether you open it 2cm or fully wide, it must swing shut and click into the locked position automatically.
• Latch Height: The latch release mechanism must be at least 1500mm above the ground OR located inside the gate (shielded) so a child cannot reach it.

Expert Tip: Over time, ground movement in Newcastle’s clay soils can shift your fence posts slightly, causing the gate latch to misalign. Test your gate every month. If it doesn’t “click” shut softly, it needs adjustment immediately.

The “NCZ”: Understanding the Non-Climbable Zone

This is where 80% of Newcastle homeowners get confused. The “Non-Climbable Zone” (NCZ) is a legal buffer zone designed to prevent children from using objects to scale the fence.

The Rule: You must maintain a 900mm arc on the outside of the pool fence that is free of any climbable objects.

Common Violations We See:

• Pot Plants: Large pots placed next to the fence are instant ladders.
• BBQs & Outdoor Kitchens: If your new built-in BBQ is within 900mm of the fence, it is non-compliant.
• Trees & Shrubs: Low-hanging branches or sturdy shrubs can be used as footholds. They must be trimmed.
• Taps & Pipes: Even a garden tap protruding from a wall near the fence can be considered a foothold.

The “Internal” NCZ

Did you know there is also a zone inside the fence? For 300mm inside the area, you cannot have objects that a child could use to climb out (though the primary focus is keeping them out). More importantly, if you use standard boundary fencing as part of your pool barrier, you must ensure there are no footholds on the pool side within the top 900mm of the fence.

Material Specifics: Glass vs. Aluminium

Compliance looks slightly different depending on the material you choose.

Glass Fencing Compliance

Glass is stunning, but it requires precision.

• No Handholds: The gaps between glass panels must be no greater than 100mm.
• The “Hinge Gap”: A common failure point is the gap between the glass gate and the hinge panel. It cannot be large enough for a child to get a fingerhold and pull the gate open.
• Glazing Standards: All glass must be Grade A toughened safety glass and stamped with the Australian Standard (AS1288) compliance mark.

Aluminium Fencing Compliance

• Horizontal Rails: If your fence has horizontal rails, they must be at least 900mm apart vertically. If they are closer, a child could use them like a ladder. This is why most modern black pool fencing uses a vertical-only design or “flat top” style where horizontal rails are minimized.
• Squeeze Points: Ensure there are no widening gaps near the posts that could trap a limb.

The “Boundary Fence” Problem

Many Newcastle homes use the existing timber boundary fence (the one you share with your neighbour) as part of the pool barrier. This is allowed, but it gets tricky.

If the boundary fence is part of the pool barrier:

1. It must be 1800mm high (unlike the standard 1200mm for internal fences).
2. It must have a 900mm non-climbable zone on the pool side. This means you cannot have horizontal rails on your side of the fence that a child could climb.
3. The Neighbour Issue: If your neighbour stacks firewood or builds a trellis on their side of the fence, it could render your pool non-compliant.

Recommendation: The safest option is often to build a separate internal pool fence (using glass or aluminium) inside your boundary line. It creates a dedicated “pool zone” and removes the risk of your neighbour accidentally making your pool unsafe.

Resuscitation (CPR) Signage

It sounds like a small detail, but you will fail your inspection without it.

• You must display a CPR sign in the immediate vicinity of the pool area.
• It must be in good condition and readable from 3 metres away.
• It must be up to date (signs fade in the sun; if yours is unreadable, replace it).

Your 2026 Compliance Action Plan

Don’t wait for the council letter to arrive. Be proactive.

1. Walk the Perimeter: Use a tape measure. Check the 1200mm height and the 100mm gaps.
2. Test the Gate: Open it slightly, open it wide. Does it latch every time?
3. Clear the Zone: Move the pot plants, tables, and chairs at least 900mm away from the fence.
4. Check the Boundary: Look at your boundary fences for horizontal rails or damage.
5. Register: Ensure your pool is listed on the NSW Swimming Pool Register.

Need a Compliance Expert?

If you are unsure about “intersecting barriers” or worried your boundary fence isn’t up to code, don’t guess when it comes to safety.

At A1 Fencing Solutions, we don’t just install fences; we install peace of mind. We understand the nuances of pool compliance in Newcastle and can design a solution that meets every regulation without sacrificing style.

Worried about your inspection?

Contact Us Today for a compliance consultation. We can assess your current setup or design a new, fully compliant barrier that keeps your family safe and your view spectacular.

Introduction: The Hidden Danger of a Non-Compliant Barrier

If your pool fence in Newcastle or Lake Macquarie has been damaged by a storm, a fallen tree, or an accident, your situation moves immediately from a routine home repair to a serious legal and safety emergency.

In New South Wales, the Swimming Pools Act 1992 makes pool owners strictly liable for the safety and compliance of their barrier at all times. A faulty gate, a damaged panel, or a gap larger than 100mm (the size of a soft drink can) instantly renders your pool non-compliant, exposing children to danger and you to significant legal and financial penalties.

This is not a repair you can defer.

At A1 Fencing Solutions, we treat pool fence damage repair in Newcastle as a top-priority, urgent service. Our local expertise ensures we not only fix the damage but restore compliance immediately.

Read this guide to understand the non-negotiable risks and how to achieve immediate compliance after damage.

1. The Critical Risks: Safety and the Law

A damaged pool fence is a dual threat: it compromises human safety and subjects the homeowner to immediate legal risk.

Risk A: Child Safety (Non-Negotiable)

A damaged gate that doesn’t self-latch, a missing panel, or a leaning section provides easy, unintended access to the water. Pool fencing regulations in NSW exist for one reason: to prevent accidental drowning, particularly in children under five. Any defect must be addressed immediately.

Risk B: Financial Penalties and Liability

The law is clear: as the pool owner, you are legally responsible for ensuring the pool barrier is always maintained in a good state of repair.

• Immediate Fines: Local councils (City of Newcastle, Lake Macquarie Council) may issue on-the-spot fines starting from $550 for a faulty or non-compliant fence. For serious breaches, court-imposed penalties can reach $5,500.
• Insurance Liability: If an accident were to occur while your fence was known to be damaged or non-compliant, your home insurance provider may deem your policy void, leaving you exposed to severe civil liability.
• Sale or Lease: If you attempt to sell or lease your property, you need a Certificate of Compliance. Damage will cause an inspection failure, halting your transaction until rectified.

Actionable Tip: If the damage leaves a large, unsecured opening, your first immediate action must be to put a robust, temporary mesh fence or wooden barrier inside the damaged fence line, securing the entrance with a padlock.

2. Common Pool Fence Damage and Compliance Failure Points

Damage to a pool fence often centres around a few key failure points, which your repair contractor must immediately assess and correct.

Failure Point	Cause of Damage	Immediate Compliance Requirement
Gate/Hinges	Storm wind, impact, or lack of maintenance	Must self-close and self-latch from any open position. If it sticks or requires a push, it is non-compliant.
Panel Gaps	Impact damage or shifting ground/rot	No gap at the bottom or between vertical bars can exceed 100mm.
Fence Height	Structural lean due to post failure	Fence must maintain a minimum height of 1.2 metres from the finished ground level, or 1.8 metres if it’s a boundary fence forming the barrier.
Non-Climbable Zone (NCZ)	Fallen branches, debris, or shifted furniture	A 900mm non-climbable zone must be maintained around the outside of the fence. Damage must not have introduced a new foothold (e.g., debris stack).

3. Your Rapid Response Plan with A1 Fencing Solutions

When you call for urgent pool fence repair, you need a contractor who understands both construction and compliance. Our service is designed to restore safety and compliance with maximum speed.

Phase 1: Rapid Assessment and Temporary Fix

1. Phone Consultation: We take your call immediately. You provide photos and details of the damage, and we determine the severity and the likely material needed (aluminium, glass, or steel).
2. On-Site Priority Visit: Our team prioritises pool fence damage. We will arrive to assess the structural integrity, confirm the failure points against NSW code, and implement a robust, temporary safety barrier if a full fix cannot be completed immediately.

Phase 2: Compliance-Focused Repair or Replacement

• Repair Focus: We don’t just patch the damage. We repair or replace the affected section with materials that meet current Australian Standard AS1926.1. This often means replacing entire posts or panels, not just a quick band-aid.
• Gate Re-Alignment: Often, storm damage causes posts to shift, throwing the gate out of alignment. We will re-set the posts, test the hinges, and ensure the self-closing and self-latching mechanism works perfectly.
• Material Quality: Our local expertise allows us to quickly source the correct, durable, non-corrosive materials (often aluminium or powder-coated steel) best suited for the Newcastle environment.

Local Expertise Guarantee: As your local Newcastle fencing contractors, we guarantee that our repair work is performed to current NSW compliance standards, giving you peace of mind that your liability has been eliminated.

Act Now to Restore Safety and Compliance

Do not risk your family’s safety or face hefty council fines. A damaged pool fence demands immediate, professional attention focused on compliance.

Your local experts at A1 Fencing Solutions are ready to help. We are equipped to handle all emergency pool fence repairs, from a broken latch to an entire storm-damaged section, restoring your security with certified quality and speed.

Your safety is non-negotiable.

📞 Contact A1 Fencing Solutions Today on (02) 9675 7776 to schedule an urgent inspection and compliant repair for your pool fence in the Newcastle region.

You’ve got the sparkling blue pool, the landscaping is planned, and summer is around the corner. Now comes the final, critical piece of the puzzle: the fence. In Newcastle, the choice almost always comes down to two heavyweights: Glass vs Aluminium.

Both materials are fully compliant with NSW safety regulations. Both are durable enough for our climate. But they offer vastly different aesthetic appeals, maintenance requirements, and price points.

As leading installers of Newcastle pool fencing, A1 Fencing Solutions helps hundreds of locals make this decision every year. The “right” choice depends entirely on your budget, your cleaning tolerance, and the look you want to achieve.

Here is an honest, side-by-side comparison to help you decide which material belongs in your backyard.

The Aesthetic Battle: Modern Glass vs. Classic Aluminium

Frameless Glass: This is the undisputed king of luxury.

• The Look: Frameless glass offers a sophisticated, high-end “resort” feel.
• The View: Its biggest advantage is invisibility. It offers a completely unobstructed view of your pool area from the house. This is crucial for safety (you can see the kids swimming from the kitchen) and for landscaping (it doesn’t visually chop up your garden).

Aluminium (Tubular): The classic Australian pool fence.

• The Look: Practical, sturdy, and familiar. While standard loop-top fences can look dated, modern “Flat Top” aluminium designs in Satin Black or Monument are very popular and contemporary.
• The View: The vertical bars do create a visual barrier. While you can see through them, they interrupt the flow of the garden.

Winner: Glass for pure aesthetics and visibility.

Cost Comparison: What Fits Your Budget?

Aluminium: This is the clear winner for budget-conscious homeowners.

• Materials: Aluminium panels are mass-produced and lightweight, keeping material costs down.
• Installation: It is faster and easier to install, resulting in lower labour costs.
• Verdict: If you have a large perimeter to fence or a strict budget, aluminium is the smart choice.

Glass: Frameless glass is a significant investment.

• Materials: You are paying for heavy, toughened safety glass and high-grade stainless steel spigots (holders).
• Installation: Glass requires extreme precision. The ground must be perfectly prepared (often requiring core drilling into concrete), and the panels are heavy to manoeuvre.
• Verdict: Expect to pay significantly more per linear metre for glass compared to aluminium.

Winner: Aluminium for affordability.

Maintenance in Newcastle: Salt Spray and Cleaning

Living in Newcastle means dealing with salt air, whether you’re in Bar Beach or Wallsend. This affects your fence choice.

Glass Maintenance:

• The Reality: Glass shows everything. Salt spray, pool water splashes, dog noses, and sticky fingers will leave marks.
• Cleaning: To keep that “invisible” look, you will need to clean it regularly—hosing it down and using a squeegee or glass cleaner. For coastal homes, this might be a weekly task.
• Pro Tip: We can apply a hydrophobic coating (like EnduroShield) which repels water and dirt, significantly reducing cleaning time.

Aluminium Maintenance:

• The Reality: Aluminium is incredibly forgiving. It doesn’t show water spots or fingerprints easily.
• Durability: Aluminium does not rust. A quality powder-coated finish will last for years with just an occasional hose down to remove salt build-up.
• Cleaning: A simple wash with soapy water once or twice a year is usually enough.

Winner: Aluminium for low maintenance.

Durability and Safety: How They Stack Up

Both fences must meet the strict Australian Standard AS1926.1.

• Safety: Both are safe if installed correctly. Glass has the advantage of being difficult to climb (no footholds). Aluminium fences must adhere to strict gap spacing to prevent children from squeezing through.
• Durability:
  • Glass: Uses toughened safety glass. It is incredibly strong and unlikely to break under normal impact. However, the stainless steel spigots can suffer from “tea staining” (surface rust) near the coast if not polished.
  • Aluminium: Highly durable and rust-proof. However, the paint finish can fade over 10-15 years in full sun.

Making the Final Decision for Your Backyard

So, which should you choose?

• Choose Glass If: You want the “wow” factor, you have a beautiful view you don’t want to block, safety visibility is your #1 priority, and you don’t mind a bit of cleaning (or paying for a coating).
• Choose Aluminium If: You want a cost-effective, durable, “set and forget” solution that requires minimal maintenance, and you are happy with a neat, functional look.

Still undecided? Why not mix and match? A popular trend in Newcastle is to install Glass along the side of the pool facing the house (for the view) and Aluminium along the side/rear boundaries (to save money and hide fences in shrubbery).

Contact A1 Fencing Solutions today. We can help you design the perfect hybrid solution.

Frequently Asked Questions

1. Is glass pool fencing hard to keep clean?

It requires more effort than aluminium. In coastal Newcastle, salt spray and pool splashes will be visible. However, a quick hose down and squeegee after swimming keeps it looking good. Coating the glass with a protective treatment makes cleaning much easier.

2. Does aluminium fencing rust near the coast?

No. Aluminium itself is naturally rust-resistant, making it an excellent choice for coastal areas like Merewether or Newcastle East. However, cheap fasteners or screws might rust, so we always use quality galvanised or stainless steel fixings.

3. Is glass fencing safe for children?

Yes, extremely. We use 12mm toughened safety glass which is incredibly strong. Furthermore, the smooth surface provides zero footholds, making it virtually impossible for a child to climb over.

4. Which is cheaper to install: glass or aluminium?

Aluminium is significantly cheaper. Glass fencing materials are more expensive, and the installation process is more labour-intensive and precise, leading to a higher overall cost per metre.

5. Can I mix glass and aluminium fencing?

Absolutely! This is a very common strategy to balance budget and aesthetics. We often install frameless glass on the prominent sides of the pool (facing the house/alfresco) and use cost-effective aluminium panels for the sides hidden by gardens or facing the boundary fence.